SSB Antenna Wiring - Oct 13, 2018
SSB Antenna Wiring - Oct 13, 2018
Embedded Files
1.5" of UV resistant vinyl tubing, and a cable tie.....
....Slide the cable tie through the section of tubing....
....wrap the cable tie around the Antenna cable and then back through the section of tubing...
....then around the stay, tighten and cut the tail off.
.....and repeat another 13 times
New Raymarine i70s Multifunction Display
New Raymarine i70s Multifunction Display
Old Data Marine Wind/Speed/Depth units
Old Data Marine Wind/Speed/Depth units
Took some effort to get the old units out...
Took some effort to get the old units out...
Prepped surfaces by sanding and cleaning with acetone
Prepped surfaces by sanding and cleaning with acetone
New temporary Teak mounting surface
New temporary Teak mounting surface
Installed new i70s Multifunction display. This unit has Depth, Wind Speed, Wind Direction, Speed, Water Temp, AIS, and like 20 other data points. Very very cool and all hooked up to the NMEA2000 network.
Installed new i70s Multifunction display. This unit has Depth, Wind Speed, Wind Direction, Speed, Water Temp, AIS, and like 20 other data points. Very very cool and all hooked up to the NMEA2000 network.
Chartplotter/Radar Display Relocation
Chartplotter/Radar Display Relocation
The previous SIMRAD NSS7 Evo2 was affixed to the helm rail. It was constantly in the way and got knocked around a lot.
The SIMRAD is mounted on a giant RAM Mount and the comms cable is 16' long. That allows me to move the entire housing inside the boat, to another mount at the chart table. It also allows me to keep it in the boat when I'm not there.
The SIMRAD is mounted on a giant RAM Mount and the comms cable is 16' long. That allows me to move the entire housing inside the boat, to another mount at the chart table. It also allows me to keep it in the boat when I'm not there.
Google Sites
Report abuse